How Do I install Scart wall plates screw terminal
|Scart Connector Pin out|
|This page provide information for wiring Scart cable to connector NX-WP-020.
Please note that the cables do no run from pin to pin, but some switch over from one end to the other.
Treat the Screen End column as the wall plate to be mounted adjacent to the TV or Screen which will be connected.
Treat the Source Equipment end as the wall plate to be mounted adjacent to the equipment you are using to feed the screen.
Each line represent a single cable, so pin 1 Audio right in should be connected to pin 2 Audio right out at the other end.
|Scart Cable between Source Equipment and Screen|
|Screen End||Source Equipment|
|Audio Right Out||1||2||Audio Right In|
|Audio Right In||2||1||Audio Right Out|
|Audio Left Out||3||6||Audio Left In|
|Audio Left In||6||3||Audio Left Out|
|Audio Ground||4||4||Audio Ground|
|Red Ground||13||13||Red Ground|
|Green Ground||9||9||Green Ground|
|Blue Ground||5||5||Blue Ground|
|Status / 16:9||8||8||Status / 16:9|
|Fast Blanking Ground||14||14||Fast Blanking Ground|
|Fast Blanking||16||16||Fast Blanking|
|Video Out Ground||17||18||Video In Ground|
|Video In Ground||18||17||Video Out Ground|
|Video Out||19||20||Video In|
|Video In||20||19||Video Out|