How Do I install Scart wall plates screw terminal


Scart Connector Pin out
This page provide information for wiring Scart cable to connector NX-WP-020.Please note that the cables do no run from pin to pin, but some switch over from one end to the other.

Treat the Screen End column as the wall plate to be mounted adjacent to the TV or Screen which will be connected.

Treat the Source Equipment end as the wall plate to be mounted adjacent to the equipment you are using to feed the screen.

Each line represent a single cable, so pin 1 Audio right in should be connected to pin 2 Audio right out at the other end.



Scart Cable between Source Equipment and Screen
Screen End Source Equipment
Audio Right Out 1 2 Audio Right In
Audio Right In 2 1 Audio Right Out
Audio Left Out 3 6 Audio Left In
Audio Left In 6 3 Audio Left Out
Audio Ground 4 4 Audio Ground
Red 15 15 Red
Red Ground 13 13 Red Ground
Green 11 11 Green
Green Ground 9 9 Green Ground
Blue 7 7 Blue
Blue Ground 5 5 Blue Ground
Status / 16:9 8 8 Status / 16:9
Reserved 10 10 Reserved
Reserved 12 12 Reserved
Fast Blanking Ground 14 14 Fast Blanking Ground
Fast Blanking 16 16 Fast Blanking
Video Out Ground 17 18 Video In Ground
Video In Ground 18 17 Video Out Ground
Video Out 19 20 Video In
Video In 20 19 Video Out
Ground 21 21 Ground


Leave a Reply

Your email address will not be published. Required fields are marked *