|
Nexxia Shop >Car Audio >Car Stereo Fitting Kits >Harness Adaptor >Audi ISO Radio Harness Adaptors >
Audi ISO Radio Harness Adaptor
Audi Car Stereo ISO Wiring Harness Adaptors to install a new car radio with ISO connections. These Car Wiring ISO Harness adaptors convert your existing Car stereo radio connector including Audi with Bose system or Rear Amplified Speakers into an ISO radio adapter, which is a standard connection provided by all UK aftermarket head units. ISO Car Stereo Wiring Adaptors consists of two 8 pin connectors which can be one block with two halves, or two connectors. These Autoleads PC9 Harness adaptors only connect power and speakers, for steering controls see Steering Control Interfaces.
|
|  |
|
|
Modified by Nexxia
PC9-401-KIT with PC5-90 included and connected. - Converts Radio Plug to ISO Connection, suitable for aftermarket radio's
- Connects your Power and Speakers only
- NOT for connecting Steering Controls, see CTSAD003 Parts
Audi Rear Amplified ISO Adaptor. A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. PLUG AND PLAY, this harness has already been connected to PC5-90, and just plugs in. Use this harness where you have four wires in the Brown ISO connector. Click Part Code to see Vehicle applications. NOTE: Vehicles which do not have an ignition switched feed will also require PC2-18-4.
Also see Technical Advice on installing these parts.
 |
|
Part Code: |
| PC9-401-KIT
| |
£24.95 inc VAT |
in stock 3 Days | 
|
|
| more details |
|
| | |
 |
|
|
Audi A1 2010 ISO Harness Adaptor. The SOT series leads are designed to install aftermarket hands free kits such as Parrot or iO_Play with ISO connections. They are provided in two parts, one converting Car Wiring loom to ISO the second lead is then ISO from the Car Kit and plugs back into the Car Radio. Other Devices with ISO connections can also be installed with these leads. Click Part Code to see Vehicle applications. For amplified vehicles use 10-400 leads.
| |
| |
|
|
|
Also see PC9-401-KIT which includes PC5-90 Already Attached. - Converts Radio Plug to ISO Connection, suitable for aftermarket radio's
- Connects your Power and Speakers only
- NOT for connecting Steering Controls, see CTSAD003 Parts
PC9-401 Audi Rear Amplified ISO Adaptor. A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. To activate rear speakers, the blue & White wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote). At the same time the blue wire on the PC5-90 adaptor also needs connecting to the Blue wire off the New Head Unit. Use this harness where you have four wires in the Brown ISO connector. Click Part Code to see Vehicle applications. Also see Technical Advice on installing these parts.
| |
| |
|
|
|
A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. Active system adaptor which connects to amplfier pre-outs of your new head units. To activate rear speakers, the blue & White wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote). At the same time the blue wire on the PC5-90 adaptor also needs connecting to the Blue wire off the New Head Unit.Use this harness where you have NO Brown ISO connector. Click Part Code to see Vehicle applications. Also see Technical Advice on installing these parts.
| |
| |
|
|
|
| A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. To activate rear speakers, the blue & White wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote). At the same time the blue wire on the PC5-90 adaptor also needs connecting to the Blue wire off the New Head Unit. Click Part Code to see Vehicle applications. |
|
Part Code: |
| PC9-409
| |
£16.99 inc VAT |
in stock 3 Days |
|
|
| more details |
|
| | |
|
|
|
A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. Active system adaptor which connects to amplifier pre-outs of your new head unit. To activate rear speakers, the blue & White wire on the Red mini ISO plug also needs to be connected to the Blue wire coming off of the New Head Unit (marked Amp Remote). At the same time the blue wire on the PC5-90 adaptor also needs connecting to the Blue wire off the New Head Unit. Use this harness where you have NO Brown ISO connector. Click Part Code to see Vehicle applications. Also suitable for Alfa 156 with Connect Nav Bose system 2003 were the vehicle has no Speaker ISO Block. Also see Technical Advice on installing these parts.
| |
| |
|
|
|
A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. This Amplifier Adaptor will connect RCA outputs of your new head unit to the existing Factory fitted amplifier. FOR FULLY AMPLIFIED VEHICLES BOSE on Quad lock connections. Additional Connections Required, see "Technical Advice Here"
| |
| |
|
|
|
PC9-401 with PC5-90 and CTSAD001 included and connected by Nexxia. Audi Rear Amplified ISO Adaptor with Steering Control Interface. A harness adaptor lead allows you to install a car radio of your choice with out cutting any of the existing car wiring. All harness adaptor Leads are ISO ended and will plug directly into most models of car radio. PLUG AND PLAY, this harness has already been connected to PC5-90 and CTSAD001, and just plugs in. Use this harness where you have four wires in the Brown ISO connector. You will also need relevant patch lead for you chosen head unit such as CTPIONEERLEAD for Pioneer, SEE CT STALK ADAPTORS page for additional adaptors also required. NOTE: Vehicles which do not have an ignition switched feed will also require PC2-18-4.
Also see Technical Advice on installing these parts.
| |
|
|
|
|
