Ignition Generating ISO Harness. This special ISO harness produced by Nexxia allows you to install an aftermarket Car radio or Hands Free Kit into a Vehicle that doesn't have an ignition switched power supply at the radio, and not have to worry about fetching the power supply with a seperate wire from the fusebox.  During the installation process, the device goes through a learning sequence with the engine running to detect high voltage. Once complete. It will only provide power with the engine running.

Use with Sound 5 Radio's in Mercedes.

It also ensures power present in the vehicle loom on the ignition pin such as Mercedes Vans with Sound 5 Radio, is cut with ignition off to prevent Radio's or Hands Free kits being on all the time.

Ignition Generating ISO Harness Vauxhall.

Ignition Generating ISO Harness. This special ISO harness produced by Nexxia allows you to install an aftermarket Car radio or Hands Free Kit into a Vehicle that doesn't have an ignition switched power supply at the radio, and not have to worry about fetching the power supply with a seperate wire from the fusebox.  During the installation process, the device goes through a learning sequence with the engine running to detect high voltage. Once complete. It will only provide power with the engine running.

• Converts Car Radio ISO Speaker Connection to Amplifier Level Feeds from New Radio
• Can also be used with an ISO Adaptor or Steering Interface Adaptor
  

This ISO adaptor can be used to install a replacement head unit in a vehicle with Amplified system. It will convert the Amplifier inputs on the 8 pin Speaker ISO block to RCA's and is suitable for line level fed systems. An additional wire is also supplied for grounding if you experience problems with Ground Loop interference. Also see PC2-36-AMPR for Alfa Romeo or PC2-36-AMP2 for some Range Rovers. Use with CTSSA001 where Saab is amplified. Use with PC99-X46 for Mazda with Bose system.