|
Nexxia Shop >Car Audio >Car Kit Installation >Fuse Spur Packs >
Fuse Spur Packs and Ignition Generators
Blade Fuses and mini Blabe fuses with a spur wire coming off allowing easy access to a circuit which is ignition switched, from the fusebox. These are often required when installing a hands free car kit to a vehicle which does not have an ignition switched connection at the back of the radio.
|
|
Modern vehicles that have Canbus Systems, do not have an ignition switched feed to the car radio. If installing a new radio, this can cause problems for the radio to work properly. This device can be fitted to create an ignition feed where one doesn't exist through sensing the Canbus signals from the vehicle. This device can also be used for ignition generation to power head units in combination with harness adaptors such as PC2-85-4 and PC2-32-4.
| |
|  |
 |
|
|
| Modern vehicles that have Canbus Systems, do not have an ignition switched feed to the car radio. If installing a new radio, this can cause problems for the radio to work properly. To get round this problem you can replace one of the cars existing Fuses which is on an Ignition switched circuit, with a Fuse Spur of the same rating. Supplied as a pack, it includes fuses rated at 10A, 15A, 20A, 25A and 30A. | |
| |
|
|
|
| Modern vehicles that have Canbus Systems, do not have an ignition switched feed to the car radio. If installing a new radio, this can cause problems for the radio to work properly. To get round this problem you can replace one of the cars existing Fuses which is on an Ignition switched circuit, with a Fuse Spur of the same rating. Supplied as a pack, it includes fuses rated at 10A, 15A, 20A, 25A and 30A. | |
|
|
|
|
