Rockford Fosgate Car Audio Amplifiers

Rockford Fosgate amplification at an unbelievable value. The R150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer.

Specifications:

• Configuration: 1 Channel
• Rated Power (RMS):-
  50 Watts @ 4-Ohm
  75 Watts @ 2-Ohm
  150 Watts @ 1-ohm
• Total Power 150 Watts RMS
• Bridgeable :  No
• Efficiency (average): > 60% @ 4 Ohm
• Crossover Controls : High Pass 80Hz @ 12dB
  Low Pass 50Hz - 250Hz @ 12dB
• Signal Input: High/Low Switch
  High/Low Level input - 4 Pin Harness
  Hi-Level Sensitivity: Variable DC Offset
• Power Wire Gauge: 10 AWG
• Speaker Wire Gauge : 12 AWG
• Remote Controls: Optional PEQ provides 0dB to +18dB @ 45Hz
• Visual Indicators: Power/Protect, BRT (Boost)
• Circuit Topology Class : Class-A-B
• Frequency Response : 20Hz - 20KHz +/-1dB
• Dimensions : 6.10cm x 19.49cm x 29.30cm

Only suitable for UK Orders.
Note, Automatic Security Checks carried out on all transactions to protect genuine consumers.

Rockford Fosgate Punch Amplifier PBR300X1. Its incredible how small and powerful this ampliifier is. Rockford Fosgate's PBR300X1 mono amp can drive up to 300 watts RMS into a one-ohm load, allowing you to power multiple subs to get more bass. And this Punch Class BR amplifier generates this power from a very tiny case — literally the size of your hand. Boosted Rail (BR) amp technology uses capacitors and high-speed circuitry to boost the amp's power supply voltage, when needed, so it can handle massive musical peaks without missing a beat. Rockford Fosgate uses this new technology to create a remarkable amp that fits almost anywhere and delivers powerful sound.

Specifications:

• Configuration: 1 Channel
• Rated Power (RMS):-
  75 Watts @ 4-Ohm
  150 Watts @ 2-Ohm
  300 Watts @ 1-ohm
• Total Power 300 Watts RMS
• Bridgeable :  No
• Efficiency (average): > 75% @ 4, 2 or 1 Ohm
• Crossover Controls : 35Hz - 250Hz Low Pass @ 12db/Octave Butterworth
• Signal Input: High/Low Switch
  High/Low Level input - 4 Pin Harness
  Hi-Level Sensitivity: Variable DC Offset
• Power Wire Gauge: 10 AWG
• Speaker Wire Gauge : 12 AWG
• Remote Controls: Optional PEQ provides 0dB to +18dB @ 45Hz
• Visual Indicators: Power/Protect, BRT (Boost)
• Circuit Topology Class : Class-BR
• Frequency Response : 20Hz - 250Hz +/-3dB
• Dimensions : 3.90cm x 10.8cm x 17.2cm
  

Only suitable for UK Orders.
Note, Automatic Security Checks carried out on all transactions to protect genuine consumers.