More Information - Scart Wiring Diagram

More Information - Scart Pin connections

This page gives More Technical information about Scart Pin outs to assist in connection of Scart Wall Mounts.

More Information > Scart Pin Connections

For Scart Cable we suggest using a Basic Range Scart Cable such as NX-SCT-020.

Scart Connector Pin out

This page provide information for wiring Scart cable to connector NX-WP-047. Please note that the cables do no run from pin to pin, but some switch over from one end to the other.

Treat the Screen End column as the wall plate to be mounted adjacent to the TV or Screen which will be connected.

Treat the Source Equipment end as the wall plate to be mounted adjacent to the equipment you are using to feed the screen.

Each line represent a single cable, so pin 1 Audio right in should be connected to pin 2 Audio right out at the other end.

These wall plates now feature removable plugs. This means the wires can be installed onto the seperate plugs, and then the plugs installed onto the back of the plate.

Scart Cable between Source Equipment and Screen
Screen End		Source Equipment
Audio Right Out	1	2	Audio Right In
Audio Right In	2	1	Audio Right Out
Audio Left Out	3	6	Audio Left In
Audio Left In	6	3	Audio Left Out
Audio Ground	4	4	Audio Ground
Red	15	15	Red
Red Ground	13	13	Red Ground
Green	11	11	Green
Green Ground	9	9	Green Ground
Blue	7	7	Blue
Blue Ground	5	5	Blue Ground
Status / 16:9	8	8	Status / 16:9
Reserved	10	10	Reserved
Reserved	12	12	Reserved
Fast Blanking Ground	14	14	Fast Blanking Ground
Fast Blanking	16	16	Fast Blanking
Video Out Ground	17	18	Video In Ground
Video In Ground	18	17	Video Out Ground
Video Out	19	20	Video In
Video In	20	19	Video Out
Ground	21	21	Ground

For more information, please e-mail Technical@nexxia.co.uk