This page gives More Technical information about ISO wiring pins.
More Information > ISO wiring
Connections for Block A - Power
| 1) N/A | 3) N/A | 5) +12v output Blue | 7) Battery + Red |
| 2) N/A | 4) Ignition +12v Yellow | 6) Illumination Orange | 8) Ground Black |
Connections for Block B - Speakers
| 1) Right Rear + Purple | 3) Right Front + Grey | 5) Left Front + White | 7) Left Rear + Green |
| 2) Right Rear - Purple/Blk | 4) Right Front - Grey/Blk | 6) Left Front - White/Blk | 8) Left Rear - Grean / Black |
Connections for Block C - Left hand side, uses Yellow plug
|
1) Line out Left Rear + |
4) Line out Left Front |
|
3) Line Out Ground/Earth |
6) Switched Positive for Amplifier |
|
2) Line out Right Rear + |
5) Line out Right Front |
Connections for Block C - Centre, uses Green plug
|
7) TEL +ve |
10) ENA |
|
9) CAN Low |
12) TEL -ve |
|
8) CAN High |
11) REM |
7
- Telephone Audio Input Signal - TEL +ve
8 - Second display, CLOCK (for radio sets with CAN databus communication CAN
High)
9 - Second display, DATA (for radio sets with CAN databus communication CAN Low)
10 - Second display, ENA (not assigned for radio sets with CAN databus
communication)
11 - Remote control, REM (not assigned for radio sets with CAN databus
communication)
12 - Telephone Audio Input Signal - TEL -ve
Above based on VW Symphony 2, not applicable to all connections of this layout.
Connections for Block C - CD Changer Right hand side, uses Blue plug
|
13) Data in |
16) Voltage supply |
19) Left Channel positive |
|
15) Clock |
18) Left & Right Channel Earth |
|
|
14) Data out |
17) Control Signal |
20) Right Channel positive |
For more information, please e-mail Technical@nexxia.co.uk
Copyright
© 2004 Nexxia Designs Limited. All rights reserved.
Revised: August 01, 2007