Car Stereo Fitting Kits



\| Home \| Products \| About Nexxia \| News \| Contact \| Terms \| Feedback \| Cancel Order \| "What you need" \| Basket \|Search \| Links \|

Installation Tip - Steering Control Interface Adaptors

This page gives installation advice about how steering interface leads work for installation of head units.

All Prices include Vat - Fast Delivery - Full Technical Back up - Europe and International Orders Welcome

Fascia Adaptors for installation of a standard ISO Car Radio.

Fascia Adaptors

Car Stereo Harness Adaptors to install a radio with ISO connections
Harness Adaptors

Steering control Interface leads for installation of a new Radio.

Steering Adaptors

Antenna adaptor to install new Head unit with DIN, ISO or Fakra connection.
Antenna Adaptors

Installation Advice > Stalk Control Interface Adaptors

For the connects2 range of Steering control leads, we offer the dedicated head unit adaptors such as CTJVCLEAD. These have to be installed in a set order to ensure the head unit recognises the new leads are attached.

Please follow this routine when installing CTJVC leads.

1.    Link the JVC interface to the main vehicle lead.

3.    Plug the main loom (not the jack) into both the vehicle and the head unit.

4.    Power up the stereo by ignition and seek then store a radio station (this wakes the unit up)

5.    Switch the stereo off by ignition.

6.    Plug in the jack

7.    Switch the stereo on by ignition and wait 1 minute before testing the remote controls.

8.    If in any doubt that this has not been done in the correct order, the loom must be disconnected from the vehicle, the jack disconnected from the stereo and the process started again.

This system seems to be needed on new (2005) Sony's, JVC's and Alpines. Due to the higher technology employed in these units, they operate more like computers then audio systems, so the addition equipment such as CD Changers, Auxilliary inputs and Steering remote control devices, need to be 'found' by the system after it has been awoken as just a stereo. Future instructions supplied with the leads will cover this.

For more information, please e-mail Technical@nexxia.co.uk

Nexxia Audio Solutions is the trading name owned by Nexxia Designs Limited registered in England and Wales No. 3788559.