Installation Advice - ipod Charge and Play connector

Installation Tip - Ipod Charge and Play Connector.

This page gives installation advice about how to install the ipod Charge and Play connector.

Installation Advice > Ipod Charge and Play Connector.

This cradle is compatible with any 3rd Generation onwards ipods and should be used in conjunction with ipod head unit adaptor leads PC7-POD-1## series and PC7-POD-2## series.

The kit should include:-

ipod connector lead

Installation Guide

1) Remove the aftermarket head unit.

2) Install the head unit adaptor lead ISO connections onto the Head unit connections.

3) Install other leads supplied with head unit adaptor into head unit, such as CD Port and Phono RCA connections.

4) Connect the head unit adaptor lead to the ipod interface module.

5) Connect the ipod lead to the ipod interface module supplied with the Head unit adaptor lead.

6) Connect the ground connection to the back of the head unit.

7) Carefully re-install the head unit back into the vehicle.

8) You should now be able to test the system, using selection on the head unit to pick up the audio input.

When testing the system, switch the head unit on and verify that the CD2 source can be selected using the source key, and the auxiliary audio can be heard. Connect the ipod and check that it charges when head unit ignition is on. During normal use the volume is adjusted on the head unit.

For more information, please e-mail Technical@nexxia.co.uk