|
Facia Adaptors ISO. |
Car Stereo Harness Adaptors |
Steering control Interface |
Antenna adaptor ISO. |
|
Facia Adaptors ISO. |
Car Stereo Harness Adaptors |
Steering control Interface |
Antenna adaptor ISO. |
A range of repair ISO connectors for both Radio and Car wiring looms including adaptors to older style Din connections and bullet connectors. Also available ISO Amplifier adaptor to install an amplifier to your existing factory fitted head unit.
Car Stereo Fitting Kits > ISO Connectors
For Car Stereo ISO adaptors to install ISO accessories such as Parrot Hands free kits, see Car Kit Installation.
For replacement Head unit connectors, see Car Stereo Spares.
Din Harness
(Din)
PC3-04
A DIN connection for DIN radios. Only caters for two speakers but PC3-05 can be used to cover fours speakers with this connector.
£6.25
Din Speaker connections
(Din)
PC3-05
A set of two din connector for speaker connections, covers two speakers.
£3.49
DIN to ISO Harness
|
|
PC2-36-2This adaptor can be used to install a Radio with Din connections to a Car with ISO connections. caters for Four Speakers. |
£9.99
|
ISO to DIN Harness
PC2-16-4
This adaptor can be used to install a Radio with ISO connections to a Car with DIN connections.
£9.99
ISO Repair connector for Car Harness
ISO Male Plug to Bare ends
|
|
PC3-08
This
adaptor can be used to repair or convert the wiring loom of your car for
the modern ISO type connection used by all Aftermarket radios. It has a
male Plug but female connections. |
£4.99
|
ISO Repair connector for Car Harness
ISO Male Plug to Bullet connectors
PC3-08-6
This adaptor can be used to repair or convert the wiring loom of your car for the modern ISO type connection used by all Aftermarket radios. It has a male Plug but female connections with wires terminating in bullet connectors.
£5.99
ISO Repair connector for Radio
ISO Female Socket to Bare ends
|
|
PC2-36-0This adaptor can be used to repair or convert the wiring loom of your Radio for the modern ISO type connection used by all Aftermarket radios. This version is ISO to Bare Ends. It has a female socket but feature male pin connections. |
£4.99
|
ISO Repair connector for Radio
ISO Female to Bullet connectors
|
|
PC2-36-6This adaptor can be used to repair or convert the wiring loom of your Radio for the modern ISO type connection used by all Aftermarket radios. This version is ISO to B ullet connectors. |
£5.99
|
ISO to ISO Extension
ISO Female to ISO Male
|
|
PC2-36-4This adaptor can be used to extend the ISO connection of your car to radio. This version is ISO Female to ISO male. |
£5.99
|
RCA Line out adaptor
|
|
PC9-450This adaptor can be used to provide a low level line output from a factory fitted head unit that doesn't have RCA outputs. It means you can run an amplifier from the existing original fitted radio. It will cut the rear speaker channels and convert these to RCA outputs. If you car hasn't got ISO connections for the head unit then you could use a SOT lead from the Telemute range to do this. |
£15.99
|
Amplifier Adaptor 4 Channel ISO
RCA Line out adaptor
PC9-451
This adaptor can be used to provide a low level line output from a factory fitted head unit that doesn't have RCA outputs. It means you can run an amplifier from the existing original fitted radio. It will cut the
front and rear speaker channels and convert these to RCA outputs. If you car hasn't got ISO connections for the head unit then you could use a SOT lead from the Telemute range to do this.£19.49
8 Way ISO Female Housing
Wiring Diagram
M-58
An 8 way Speaker ISO block used for Speaker ISO connections. Requires M-50 terminals. Buy as a pack of 10, part number M-58-10.
£1.75
Pack of 10
£9.99
All prices include VAT
8 Way ISO Female Housing
Wiring Diagram
M-59
An 8 way Power ISO block used for Power ISO connections. Requires M-50 terminals. Buy as a pack of 10, part number M-59-10
£1.75
Pack of 10
£9.99
All prices include VAT
10 Way ISO Female Housing
M-51
An 10 way ISO block used for accessory 10 way ISO connections. Requires M-50 terminals. Buy as a pack of 10 part M-51-10.
£2.25
Pack of 10
£16.99
All prices include VAT
ISO Terminal
M-50
ISO Terminal that can be used with M-58 & M-59 housings above. Wires can be crimpled into these receptacles and these clip into the housings.
£2.00
All prices include VAT
8 Way ISO Male Housing
Wiring Diagram
M-56
An 8 way Speaker ISO block used for Speaker ISO connections. Requires M-55 terminals. Buy as a pack of 10, part number M-56-10.
£1.75
Pack of 10
£9.99
All prices include VAT
8 Way ISO Male Housing
Wiring Diagram
M-57
An 8 way Power ISO block used for Power ISO connections. Requires M-55 terminals. Buy as a pack of 10, part number M-57-10
£1.75
Pack of 10
£9.99
All prices include VAT
ISO Receptacle
M-55
ISO Receptacle that can be used with M-56 & M-57 housings above. Wires can be crimpled into these receptacles and these clip into the housings.
£2.00
Copyright © 2003
Nexxia Designs Limited. All rights reserved.
Revised: April 27, 2007
